SinoCleansky CNG Dispenser Standard type
（Three bank, two nozzles）
1. Main characteristics
1. With the interface for IC card to upgrade easily.
2. With the interface for a bill printer to realize operating by plug-in.
3. With the interface for computer communication to ready for
upgrading and
installing the management system for a refueling station.
4.The modularized triplet solenoid valve can be maintained and
repaired
on-line.5.Re-display the records in many times and inquiry
information.
5. Re-display the records in many times and inquiry informaiton.
6. 1/2 inch stainless steel pipe to ensure the refueling speed.
7. The refueling pressure for the automobile can be preset by manual.
8. The refueling mode can be shifted to the quick speed for a bus.
9. With back light display panel, stand low temperature.
10.Self-protection for over-voltage, over-pressure, and over-current,
overflow.
11. Advanced protective mode only with one-key, and emergency stop
in an easy way.
12. The cumulative data can be stored for 10 years.
13. Automatic diagnose and display trouble code.
14. Various models: single-hose, double-hose, single-pipeline,
double-pipeline, three-pipeline.
2. TECHNICAL SPECIFICATIONS
|
|
Technical specifications
|
|
Inlet Pressure Barg
|
250
|
|
Fill Pressure Barg
|
200 at 15 deg.C
|
|
Operating temp. range
|
-20 to 70
|
|
Maximum flow (kg/min)
|
35
|
|
Nominal flow (kg/min)
|
12
|
|
Minimum flow (kg/min)
|
3.5
|
|
Batch accuracy
|
±0.5%
|
|
Electrical Supply
|
AC 230 volts + 25% 50 Hz + 3%
|
|
Fill probe
|
Type 7/16” (11mm) N.Z probe or NGV 1 - P30 type
|
|
Pressure Rating barg
|
200 at 15 deg.C
|
|
Flexible fill & vent hose
|
Twin
|
|
Pressure Rating barg
|
450
|
|
Sequential filling
|
Three bank
|
|
Mass flow meter
|
Micro motion CNG 50
|
|
No. of metering lines
|
Two independent
|
|
Metering principle
|
Coriolis
|
|
Metering Make
|
Micromotion USA or EH Germany
|
|
Metering Model
|
Micro motion CNG 50 or EH
|
|
Batch delivery accuracy
|
±0.5%
|
|
Repeatability
|
±0.25%
|
|
Breakway Coupling
|
Yes
|
|
Hose length
|
4.5M
|
|
Mcalculator unit
|
lectronic with backlight illumination
|
3. INSTALLATION INSTRUCTION
Power supply: AC 220V+/-20%; 50+/-1Hz;
Communication: 4x0.75 shielded wire;
The dimensions:
Sizes of dispenser L×N×H 1160×520×2170(mm)
Sizes of packaging L×N×H 1350×695×2380(mm)
Net weight:250kg Gross weight:350kg
- For the control of the amount of gas it is optional;
- to choose from four different types of MASS meters
- Single Hose CNG dispenser- Double Hose Dispenser
