+ 86-10-64709959
EN
Բոլոր բաժինները

Գազի բեռնաթափման սարքավորում

Դու այստեղ ես : Տուն>ապրանքներ>Գազի բեռնաթափման սարքավորում

ապրանքներ

Հետադարձ Կապ

Beijing Sinocleansky Technologies Corp.

Հասցե:

Wangjing SOHO, Chaoyang շրջան, Պեկին, PR Չինաստան: Փոստային ինդեքս : 100102

Հեռ.

+ 86-10-64709959

email:

[էլեկտրոնային փոստով պաշտպանված] Դիտեք ավելին +
  • Նկարագրություն

ՆԿԱՐԱԳՐՈՒԹՅՈՒՆ

Reciprocating Pump

Industrial gas filling pumps

Carbon dioxide pumps

Large flow and medium pressure piston pumps

 

Կենտրոնախույս պոմպ

Cryogenic centrifugal pumps

Multi-phase cryogenic centrifugal pumps

 

1. Industrial gas pumps are mainly used for air separation products: filling of liquid oxygen, liquid nitrogen, liquid argon, liquid carbon dioxide, air supply systems. The units are mainly single row, double row, and three-row reciprocating pumps. Refer to each parameter table specific parameters.

Its flow is 30 to 5000L/H and its maximum exit pressure is 35.0MPa. 

An electromagnetic adjustable speed motor, or a fixed rotating speed motor, or a variable frequency and variable speed motor, or an explosion proof motor or an explosion proof variable frequency motor can be equipped as per actual requirements.

2.

Carbon dioxide pumps

Կիրառելիություն

 Such pumps are mainly used for liquid carbon dioxide.

 Filling of carbon dioxide liquid cylinder.

 Air supply, air distribution system.

Հիմնական պարամետրեր, տեխնիկական

 Flow: 100-4000L/H

 Maximum exit pressure: 10.0Mpa

3.

Large flow and medium pressure piston pumps

 Flow: 4000-72500L/H

 Maximum exit pressure: 8.0Mpa

 The pump has modular design and a wide coverage of flow.

 A high vacuum jacket pump head is used, and the vacuum degree reaches 10-5 torr so as to reduce cold loss.

 It has a reliable sealing structure.

 Multiple configurations enhance the safety and automation degree of the pump.

4.

Cryogenic centrifugal pumps

Such pumps are mainly used for the filling and transport of storage tanks with cryogenic liquids such as liquid oxygen, liquid nitrogen, liquid argon and cooling liquid; the mainly single stage, single suction and direct-connected centrifugal pumps. 

5.

Multi-phase cryogenic centrifugal pumps

Such type of pump is used to deliver and transfer LOX, LIN LAr, LNG, or other cryogenic liquids in high pressure; in addition, it’s available for water, oil, and other chemical liquids. This units is a multi-phase, cascade-structured centrifugal pump. According to the performance of its seals, it can be classified as submerged pump and seal pump.


Հետադարձ Կապ